Product features

  • Individually Addressable. Each LED can have its own color and brightness. You can control each LED individually and set it to any color or animation you want.
  • It can be compatible with Arduino Raspberry Pi T1000S K1000C etc. It can also be controlled by pre-programmed controllers such as SP105E SP110E bluetooth controllers, SP108E wifi controllers and SP106E SP107E music controllers.
  • IP68 waterproof. Each RGB LED and controller chip is sealed in silicone. They are weatherproof and rugged. You can put them outdoor, even underwater.
  • Each strand has two 3-pin JST SM connectors so you can connect multiple strands in a row, just watch for how much current they want. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.
  • They're typically used to make outdoor advertising signs, led screen, led wall, advertising board and widely applied to hotel, KTV, bars, wedding, party atmosphere lighting.

Product Description

Model: WS2811 LED pixel
Light source: F8RGB*1
IC Model: WS2811 IC
Quantity: 50 LEDs / strand
LED Shape: Bullet shape
Color: full color, 24-bit
Gray level: 256
Size: Please refer to the picture
Drill hole diameter:12mm
Length: 3.5m/strand
Operating voltage: DC 12V
Power: 0.3W/LED (15W/Strand)
Waterproof: IP68 waterproof
Connection: Red: +12V; White: DATA; Blue: GND

Kindly note
1) It comes without power supply and controller. You’ll need a controller such as an Arduino to use them.
2) The work voltage of the LED string must be 12V DC. Otherwise, it will be burnt out. 12V 1.25A supply can drive one strand (50 pieces).
3) Please refer to the fifth prodcut image, it shows the input port.

50pcs WS2811 LED pixels light

To let it work, you may need these
12V 5A Power supply:
SP105E Bluetooth Magic LED Controller:
T1000S LED Controller:
Raspberry Pi:
Black wire LED pixels:

Read more
Learn what other customers say about this product Read more